Smart locks

Commercial Smart Locks

← All services

A commercial smart lock is a keypad or card lock that does its job at one door, without running cable back to a panel. Atlas Integrated Security installs commercial smart locks on office suites, storage rooms, back-of-house doors and shared spaces in New York buildings, and we fit them to the door and the hardware already there.

When a smart lock is the right fit

A smart lock makes sense when one door needs codes or cards but does not need to be wired into a building system. Typical doors:

  • An office suite where staff come and go and keys keep getting copied.
  • A supply room, records room or IT closet that only a few people should open.
  • A staff entrance or back-of-house door that needs its own codes.
  • A shared amenity room in an apartment building, like a gym, package room or roof door.

When a door needs to be part of one system with the lobby readers, the intercom and the schedule for the whole building, we look at access control instead. Many buildings use both: access control at the main doors and smart locks on the doors inside.

How do you choose the right lock for a door?

We start with the door, not the lock. The door has to close and latch on its own, the edge has to take the lock body, and the lock has to match how the door is used.

  • Cylindrical lever locks fit most interior office and storage doors.
  • Mortise locks suit heavier doors and doors that see constant traffic.
  • Exit devices are used where people have to push out in one motion, and some take a keypad or reader trim on the outside.

We also look at the frame, the strike and the closer. A smart lock on a door that drags or bounces open will give trouble no matter how good the lock is, so we tell you if the door needs work first.

Codes, cards and who gets in

Each person or group gets its own code or card. When someone leaves, their code is removed and the rest keep working. That is the main reason buildings switch away from plain keys: you stop chasing copies and you change access without changing the lock.

Some locks keep their settings at the door. Others can be managed from a phone or a computer. On the site visit we go over how many people use the door, who will manage the codes and how often they change, and we recommend the lock that fits that.

What happens on the install?

We remove the old hardware, prepare the door if the new lock needs it, mount the lock and the strike, and set it up with you. Before we leave we test every code and card you gave us, show you how to add and remove users, and check that the door closes and latches every time. Each lock keeps a mechanical key override for the times you need one.

Frequently asked

Can a smart lock go on my existing door?

Usually, yes. Most commercial doors take a smart lock in place of the lever or lock already there. If the door needs a different prep or a new strike, we tell you on the site visit and put it in the written quote.

What happens if the batteries run low?

Most commercial smart locks show a low battery warning at the keypad, and the mechanical key still opens the door. We show you how to change the batteries when we hand the lock over.

Do you install smart locks across New York City?

Yes. We work in all five boroughs, Long Island and Jersey City from our office at 595 Washington Ave in Brooklyn. Call (347) 357-0985 or text a photo of the door to get started.

Next step