The main types of physical access control systems sort along two separate lines. One is the credential a person presents at the door: a keypad code, a card or fob, or a phone carrying a mobile credential. The other is the architecture that decides whether the door opens: a standalone unit that decides at the door, or a networked system where a controller decides and keeps records for many doors.
Credential and architecture are separate choices
Access control terms get tangled because they describe two different choices. Keypad, card, and mobile name the credential. Standalone and networked name the architecture, meaning where the unlock decision is made and recorded. The two choices are independent. A keypad can sit on a self-contained lock or feed a central system, and so can a card reader.
Credentials: keypad codes, cards and fobs, and phones
Keypad codes
A keypad code proves someone knows a number, not who they are. Issuing one takes a sentence. Withdrawing a shared code means changing it and telling everyone who still needs it, and codes spread quietly from person to person.
Cards and fobs
A proximity card or fob holds a small chip and antenna that the reader powers and reads at close range. The card proves possession: whoever holds it gets in. In a system that tracks each card, a lost one is disabled through its record, without needing the plastic back. Lending a card is easy and leaves no trace.
Mobile credentials
A mobile credential stores the same kind of permission in a phone app that talks to the reader over short-range wireless. It is issued by invitation and withdrawn remotely, and people rarely lend their phones. It does depend on a charged phone and a willing user, so many sites keep cards for visitors and vendors.
Card versus mobile is mostly a question of logistics: an item to hand out and collect, or a message to send and cancel. Neither one proves identity beyond holding the credential.
The reader collects, and something else decides
A common misunderstanding is that the reader on the wall is the system. The reader only collects the credential and passes it on.
In a networked system, a controller, which is a small panel usually mounted in a closet or above a ceiling, checks the credential against a permission list, releases the lock if the person is allowed, and logs the attempt either way. Software lets someone change permissions and read the logs for many doors from one place.
A standalone unit puts the reader, the decision, the memory, and the lock in one housing at the door, programmed door by door. That suits a door or two with a steady group of users. As doors and users multiply, each change means a trip to every door, and there is no single record of who entered.
Why shared buildings lean on easy changes and per-door permissions
A single-tenant office can run on blunt rules: staff get in, others do not. A shared building has a common lobby, suites belonging to different tenants, and occupants who come and go on their own schedules. One tenant's staff need the front door and their own floor, not the neighbor's suite.
That pattern favors individual cards, fobs, or mobile credentials on a networked system. Per-door permissions decide who opens what, and issuing or withdrawing access becomes one change rather than a visit to each lock. A shared lobby code is the weakest fit, because no one can tell who has it.
Can access control cover parking garages and elevators?
Yes. The same credential and permission list that runs the front door can open a parking garage gate and limit which floors a person can select in an elevator. A tenant who parks and rides up can use one card or phone the whole way.
Each opening type still has its own hardware and wiring. A garage reader has to be reachable from a driver's seat and handle weather and longer cable runs. Elevator control ties into the elevator's own equipment, which generally means working alongside whoever maintains the elevator. Those needs have to be assessed on site, not copied from the front door plan.
What to note about your building before calling
A few notes make a first conversation with an installer far more useful:
- How many doors, gates, and other openings need control
- Who uses each one, and how often those people change
- Whether the building is single-tenant or shared
- Any garage or elevator access you want included
- What wiring exists now, such as old readers, intercom cable, or conduit
Atlas Integrated Security handles access control and the low-voltage cabling that links readers to controllers for commercial properties in New York City, including Manhattan, Brooklyn, Queens, The Bronx, and Staten Island, as well as Long Island and Jersey City. With your notes ready, call (347) 357-0985 to talk through which credentials and architecture fit your doors.
Frequently asked questions
Do I need a networked system if I only have one or two doors?
A networked access control system is not required for one or two doors with a steady group of users; standalone units can handle that. The case for networking at that size comes from other needs: a record of who entered, users who change often, or plans to add doors, a garage gate, or elevator control later, when reprogramming each standalone unit becomes the bottleneck.
Can one credential type be mixed with another across different doors in the same building?
Mixed credentials are common in access control. A networked system can accept cards at one door and mobile credentials or keypad codes at another, or several types at one reader, provided the readers and controller support those formats. Mixing stays manageable when each person has a single user record, so withdrawing access removes it everywhere at once.
What has to be in place in the walls and ceilings before readers can be added to a door?
Adding a reader to a networked door needs a cable path from the door to a controller, power for the lock, and door hardware that can release electrically, such as an electric strike, the part of the frame that frees the latch. Low-voltage cable usually runs through walls, ceilings, or conduit, so existing paths and closet space shape the work.
Does access control change how a door has to work during a power loss?
Access control adds a power-loss decision to every electrified door. The lock is set either to unlock when power drops, called fail-safe, or to stay locked, called fail-secure. Which setting fits a door depends on how that door is used, and it is decided during planning along with whether battery backup keeps the controller and locks running for a time.
Tell us about the building.