When an employee loses an access card, suspend the credential record tied to that card before thinking about a replacement. The plastic card, the credential record the access control system recognizes, and the user's door permissions are three separate things. A card opens nothing on its own. It works only while the system recognizes its record. Disable that record, leave the user and permissions in place, then decide on a replacement and record the change.
The card, the record, and the permissions are separate things
An access card is a carrier. The plastic holds an identifier, and the reader passes that identifier to the access control system. The system checks whether the identifier matches an active credential record and whether the user tied to that record has permission for that door at that time. If either check fails, the door stays locked.
A lost card is only a problem while its credential record stays active. Suspend the record and the card becomes a piece of plastic. The user's permissions, meaning the doors and schedules assigned to that person, belong to the user rather than the card, so they need no change.
What to confirm before you change anything
A few facts keep you from disabling the wrong record or making a change nobody approved. None of them depend on a particular software package or card technology.
- The cardholder: who the card belongs to, and whether the report came from that person or from someone responsible for them, such as a supervisor or tenant contact.
- The credential record: which record in the system belongs to the lost card. A number printed on the card helps, and some users hold more than one card or credential.
- Doors and schedules: what that user can open and when, so you know what the lost card would have reached.
- Lost or possibly taken: where and when the card was last seen. A card dropped somewhere unknown and a card taken from a bag call for different people to be told.
- Approval: who has the authority to sign off on a credential change for this user or tenant.
The order to work through a lost card
Suspend the credential record, not the user
Disable the specific record tied to the lost card. Deleting the user is not the same thing, and it causes two problems. Deletion can strip away the event history linked to that person, which is exactly what you want to have if questions come up later about who used which door. It also wipes the permissions you are about to need again. The real risk is a record left active, so suspension is the step that should not wait for the others.
Leave the permissions where they are
Because the doors and schedules sit with the user, a new credential added to the same user picks them up without rebuilding anything. Changing what someone can open is a separate decision with its own reasons.
Choose a new credential or a temporary arrangement
A replacement should carry a new credential, not the old number copied onto fresh plastic. If the replacement reuses the old identifier, the lost card works again the moment that identifier is active. When a replacement cannot be issued right away, a temporary credential with a set end date, or escorted entry, covers the gap.
Write down what changed
Note the date, the record suspended, the reason, who approved it, and what was issued in its place. That entry explains the change to the next person who opens the user's record.
Situations that change the plan
A misplaced card that turns up again should not be switched back on automatically. Its record stays suspended until someone makes a deliberate decision about it.
A card that is clearly gone settles the question. Suspend the record and go straight to a replacement.
A user who has also left the organization is a separate matter. Removing that person's permissions belongs to your normal process for departures, not to the card task. Record the two changes separately so finishing one does not mark the other as done.
What to hand over to whoever makes the change
The person making the change, in-house or outside, needs a short packet:
- User name
- Credential or card identifier for the lost card
- Doors and schedules affected
- Approval, and who gave it
- Replacement decision: new credential, temporary credential, or none yet
- Date of the report and date of the change
If your team wants help with access control credentials or user setup at a commercial property in New York City, call Atlas Integrated Security at (347) 357-0985.
Frequently asked questions
Can a lost card be reused if it is found after it was disabled?
A found access card should only come back into use through a deliberate decision by whoever approves credential changes. If a replacement credential is already active, retire the found card's record rather than leaving it waiting, so one person does not end up with two credentials that could be switched on. If the card may have been in someone else's hands, issuing a new credential is the cleaner choice.
Does disabling one card affect the user's other cards or door permissions?
Disabling a single credential record leaves the user's other credentials and door permissions untouched, as long as the change is made at the credential level. Suspending the whole user account is different: it stops every card or credential that person holds. Check which level the system is acting on before saving.
Who should be notified when a card is reported lost?
When an access card is reported lost, tell whoever administers the access control system, the cardholder's supervisor or tenant contact, and any front desk or security staff who check badges by sight. If the card may have been taken rather than dropped, the person who approves credential changes should hear about it directly.
Is a temporary or visitor credential a sensible stopgap while waiting for a replacement?
A temporary access credential works as a stopgap when it is assigned to the named person, limited to the doors they need, and set to expire on a specific date. A shared visitor card handed out from a drawer is weaker, because the door history then shows the visitor card instead of the person.
Tell us about the building.