A door-position sensor tells an access-control system whether a door is physically open or closed. The reader and lock can only record that a credential was accepted and the lock was told to release. The sensor reports what the door actually did afterward. With that report, the system can tell a normal entry from a door that was propped, forced, or never fully shut.
Access granted is not the same as door opened
A controlled door produces two separate facts. The first is the access grant. Someone presents a card or other credential, the reader passes it to the controller, and the controller decides yes or no. On a yes, it releases the lock. The second fact is whether the door then swung open, let someone through, and came back to rest against the frame. The reader does not report that second fact. The door-position sensor does.
The grant is a decision the system made. Door position is a physical condition the system observes. Without a sensor, the system has the decision and no record of the condition.
Where the sensor sits and what it reports
A door-position sensor is a small two-piece device. One half mounts on the door and the other on the frame, and together they sense whether they are lined up. When the door is shut, the sensor reports closed. When the door pulls away from the frame, it reports open. The sensor is a low-voltage device wired back to the same controller that runs the reader and lock. It connects to an input, which is a terminal the controller watches for a change.
Each part has its own job. The reader identifies the credential. The lock holds the door or lets it go. The sensor reports whether the door is open or closed. The controller compares the sensor's report with its own lock commands, and that comparison lets it recognize events neither the reader nor the lock could report alone:
- Door held open: a valid entry happened, but the door stayed open longer than the system allows.
- Door forced open: the door opened even though the controller never released the lock and nothing inside signaled a normal exit.
- Door not closed after use: someone went through, but the door never settled fully against the frame, so the lock has nothing to hold.
Doesn't the reader already know what the door did?
Many people assume that a door with a reader and an electric lock already knows what is happening at the opening. The system only knows what it commanded. A valid card read proves the controller sent a release. It does not prove anyone walked through or that the door shut behind them, and it cannot show that someone wedged the door open an hour later. To a system with no sensor, a propped door and a closed door look identical, because neither one involves a card.
The opposite mistake is to treat the sensor as a break-in alarm or a stand-in for a camera. A door-position sensor reports state and nothing more: open or closed, and when that changed. It cannot say who opened the door or why. A forced-door event only tells you the door moved without a release. Finding out what actually happened takes video or a person looking into it. At an entrance with CCTV, the sensor's events give someone a specific moment to review.
Deciding which doors should have one
When a proposal shows a door-position sensor on some doors and not others, think about what you want to know about each door. Door role is a good guide. At a shared entrance like a main lobby door, a held-open alert means a door everyone relies on has been left unsecured. Back-of-house doors and tenant suite doors get less traffic, so a forced or not-closed event stands out in a quiet log. On doors that people habitually prop, expect frequent held-open alerts, which at least make the habit visible.
A not-closed alert that keeps repeating on one door often points to the door hardware rather than a person. A closer that no longer pulls the door shut is a common example. The sensor's log can flag a hardware problem as readily as a behavior problem.
Settle who reviews door events, whether that is on-site staff or a manager reading a report later. A sensor on a door nobody watches still leaves a record, but it changes nothing in the moment. If a proposal leaves the sensor off a door you care about, ask why. To talk through a specific door, call Atlas Integrated Security at (347) 357-0985.
Frequently asked questions
Can a door-position sensor be added to a door that already has a reader and lock?
A door-position sensor can often be added to a door that already has a reader and lock. It needs room to mount both halves on the door and frame, a path for low-voltage wire back to the controller, and a free input on that controller. Glass doors and long wire runs can make the work more involved, so the particular door decides how simple it is.
Does a closed reading from the sensor mean the door is locked?
A closed reading from a door-position sensor means the door is against its frame. It does not by itself confirm that the lock or strike engaged. The sensor never locks or unlocks anything; the electric lock does that when the controller tells it to. Door position and lock state are separate pieces of information, so ask which of the two a given door actually reports.
Is a door-position sensor the same as an alarm contact?
A door-position sensor and an alarm contact are often similar hardware, and both sense whether a door is against its frame. The difference is the system each one reports to. A door-position sensor feeds the access-control controller, which weighs door state against its lock commands. An alarm contact feeds an intrusion alarm panel. Some doors have both, each wired to its own system.
What happens if a sensor is misaligned or its wiring is damaged?
A misaligned door-position sensor or damaged sensor wiring usually produces door events that don't match reality. A closed door might show as open, or a door might never register opening. False alerts teach people to ignore real ones, so a sensor reporting odd states should be checked and repaired rather than silenced.
Tell us about the building.